Pet Blow Molding Machine Bronco 2000 Supra

Designation and description of operation Reheat stretch blow molding machine BRONCO 2000 is designed for production of bottles and jars made of polyterephthalate ethylene type PET. Depending on the fitted mold and type of preforms used it is possible to make PET bottles and jars of various shapes and volumes ( from 0.3 to 5 l ), that meet the standards for foodstuff packagings and household chemicals. The semi-finished product used is a preform having a suitable weight depending on the size and shape of the final product. The machine is fully automated and use of microprocessor control provides constant close watching of operation of particular devices. The control panel, voltmeters and regulator unit located on the control cabinet make it easy to watch and change all the parameters during normal operation. In case of an emergency situation the system is automatically locked and a message referring to the cause of stoppage is displayed.

Bronco 2000 Supra Specification

  • Air temperature from outside +5 – +40 oC
  • Air humidity 30 – 95 %
  • Above sea level to 1000 m
  • All electronic equipment should be properly protected from the influences of liquids and dust. – ONCE PER MONTH THE FILTER IN THE ELECTRICAL CABINET HAS TO BE CLEANED OR IF NECESSARY REPLACED
  • Mold double cavity
  • Output depending on the type of preform and the shape of product:
  • – bottle or jar to 3L to 2000 unit /h
  • – bottle or jar to 5L to 1800 unit /h
  • Product profile bottle or jar
  • Product volume to 10 liters
  • Number of cavities in a mold 2 pieces
  • Number of heating zones 8 levels
  • Mains voltage 3x220V or 3x400V
  • Frequency 50 or 60 Hz
  • Recommend fuse on the connection 63A
  • Cross-section wire connection 16mm2 (6AWG)
  • Maximum electric power 26 kW
  • – maximum heating 24 kW
  • – single heating zone 3 kW
  • – other devices 1.6 kW
  • – mean power input depending on product 20 kW
  • Control air pressure 7 bar
  • Blowing air pressure 25 bar
  • Control and blowing air consumption 7 bar 316 m3 /h.
  • Blowing air consumption 25 bar 176 m3 /h.
  • Overall dimensions (without peripherals):
  • – height 2950 mm
  • – width 1000 mm
  • – length 4000 mm
  • Weight 2000 kg
  • Personnel: 1 person

Bronco 2000 brochure...

Pet Blow Molding Machine Bronco 3000

Designation and description of operation Reheat stretch blow molding machine BRONCO 3000 is designed for production of bottles and jars made of polyterephthalate ethylene type PET. Depending on the fitted mold and type of preforms used it is possible to make PET bottles and jars of various shapes and volumes ( from 0.3 to 3 l ), that meet the standards for foodstuff packagings and household chemicals. The semi-finished product used is a preform having a suitable weight depending on the size and shape of the final product. The machine is fully automated and use of microprocessor control provides constant close watching of operation of particular devices. The control panel, voltmeters and regulator unit located on the control cabinet make it easy to watch and change all the parameters during normal operation. In case of an emergency situation the system is automatically locked and a message referring to the cause of stoppage is displayed.

Bronco 3000 Specification

  • Air temperature from outside +5 – +40 oC
  • Air humidity 30 – 95 %
  • Above sea level to 1000 m
  • All electronic equipment should be properly protected from the influences of liquids and dust. – ONCE PER MONTH THE FILTER IN THE ELECTRICAL CABINET HAS TO BE CLEANED OR IF NECESSARY REPLACED
  • Mold triple cavity
  • Output (depending on the type of preform and the shape of product) to 3000 unit /h
  • Product profile bottle or jar
  • Product volume to 3 liters
  • Number of cavities in a mold 3 pieces
  • Number of heating zones 8 levels
  • Mains voltage 3x220V or 3x400V
  • Frequency 50 or 60 Hz
  • Recommend fuse on the connection 80A
  • Cross-section wire connection 25mm2 (4AWG)
  • Maximum electric power 38 kW
  • – maximum heating 36 kW
  • – single heating zone 3,75 kW
  • – other devices 1.6 kW
  • – mean power input depending on product 26 kW
  • Control air pressure 7 bar
  • Blowing air pressure 25 bar
  • Control and blowing air consumption 7 bar 300 m3 /h.
  • Blowing air consumption 25 bar 150 m3 /h.
  • Overall dimensions (without peripherals):
  • – height 2950 mm
  • – width 1000 mm
  • – length 4520 mm
  • Weight 2500 kg
  • Personnel 1 person

Bronco 3000 brochure...

Pet Blow Molding Machine Bronco 888

Designation and description of operation Reheat stretch blow molding machine BRONCO 888 is designed for production of bottles and jars made of polyterephthalate ethylene type PET. Depending on the fitted mold and type of preforms used it is possible to make PET bottles and jars of various shapes and volumes ( from 0.2 to 5 l ), that meet the standards for foodstuff packagings and household chemicals. The semi-finished product used is a preform having a suitable weight depending on the size and shape of the final product. The machine is fully automated and use of microprocessor control provides constant close watching of operation of particular devices. The control panel, voltmeters and regulator unit located on the control cabinet make it easy to watch and change all the parameters during normal operation. In case of an emergency situation the system is automatically locked and a message referring to the cause of stoppage is displayed.

Bronco 888 Specification

  • Air temperature from outside +5 – +40 oC
  • Air humidity 30 – 95 %
  • Above sea level to 1000 m
  • All electronic equipment should be properly protected from the influences of liquids and dust. – ONCE PER MONTH THE FILTER IN THE ELECTRICAL CABINET HAS TO BE CLEANED OR IF NECESSARY REPLACED
  • Mold single cavity
  • Output
  • (depending on the type of preform and the shape of product) 300 – 1000 units /h
  • Product profile bottle or jar
  • Product volume to 5 l.
  • Number of cavities in a mold 1 pieces
  • Number of heating zones 8 pieces
  • Mains voltage 3 phase 400 or 220 V
  • Frequency 50 or 60 Hz
  • Recommend fuse on the connection 50A
  • Cross-section wire connection 10mm2 (8AWG)
  • Maximum electric power 19 kW
  • – maximum heating 18 kW
  • – other devices 1 kW
  • – mean power input depending on product 12 kW
  • Control air pressure 7 bar
  • Blowing air pressure 25 bar
  • Control and blowing air consumption 7 bar 150 m3 /h.
  • Blowing air consumption 25 bar 75 m3 /h.
  • Overall dimensions (without peripherals):
  • – height 2700 mm
  • – width 1100 mm
  • – length 3000 mm
  • Weight 1000 kg
  • Personnel 1 person

Bronco 888 brochure...